Victron 22 kW EVC300400300

Putere: 22 kW
Faze: 3‑trifazat
Disponibilitate: În stoc
: Număr de oferte: 15
Comandă minimă: 1 buc.

De descărcat

PDF Fișă tehnică — evc300400300 0,2 MB

Preț net în funcție de cantitate

de la 365,36 €

Prețurile pe praguri de cantitate sunt vizibile pentru firmele înregistrate.

Acum nu plătiți nimic. Costul transportului îl calculăm după plasarea comenzii; acesta necesită acceptul dumneavoastră.

Descriere

Stație de încărcare AC Victron EVC300400300 cu puterea 22 kW, trifazată, priză, conector Tip 2. Grad de protecție IP44, temperatură de operare de la −25 la 50 °C, curent nominal 32 A. Comunicare: Modbus TCP over WiFi, Bluetooth. Dimensiuni 377 × 148 × 148 mm (Î × L × A), greutate 3 kg.

Informații de la producător

High power EV Charging Station The EV Charging Station has three-phase and single-phase capabilities. It delivers a maximum of 22 kW AC in three-phase or 7.3 kW in single-phase mode. WiFi Communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect App Get full control and overview of all operating parameters and session statistics at a glance. LCD Touch Screen Built-in 4.3-inch LCD Touch Screen for monitoring and control. Light Ring for fast viewing the device state Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available: 1. Manual Mode to configure output current Manual mode allows configurable output current between 6-32 A. The charging power is controlled in two ways: by using the slider on the LCD touch screen or by using its web page. It allows to manually start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiency Detects when excess power is available and uses only that power to charge the vehicle. 3. Scheduled Mode to charge the EV at certain time intervals A fully programmable scheduler allows charging at different time intervals, for example at certain times during the night when grid energy is cheaper. Integration with GX devices and VRM Control and monitor the EV Charging Station from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.

Date tehnice

Dimensiuni și greutate

Adâncime	148 mm
Înălțime	377 mm
Lățime	148 mm
Lungime	307 mm
Greutate	3 kg

Detalii produs

Serie	EV Charging Station – 22 kW
Interval tensiune de încărcare	170-265 V
Grad de protecție IP	IP44
Curent nominal (configurabil)	32 A
Interval de temperatură de funcționare	-25-50 °C
Comunicare	Modbus TCP over WiFi, Bluetooth