Victron 22 kW EVC300400300

Leistung: 22 kW
Phasen: 3‑phasig
Verfügbarkeit: Auf Lager
: Anzahl der Angebote: 15
Mindestbestellung: 1 Stk.

Downloads

PDF Datenblatt — evc300400300 0,2 MB

Nettopreis nach Menge

ab 365,36 €

Staffelpreise sind für registrierte Unternehmen sichtbar.

Keine Zahlung jetzt. Der Transport wird nach der Bestellung kalkuliert und von Ihnen freigegeben.

Beschreibung

AC-Ladestation Victron EVC300400300 mit 22 kW Ladeleistung, dreiphasig, steckdose, Stecker Typ 2. Schutzart IP44, Betriebstemperatur −25 bis 50 °C, Nennstrom 32 A. Kommunikation: Modbus TCP over WiFi, Bluetooth. Abmessungen 377 × 148 × 148 mm (H × B × T), Gewicht 3 kg.

Herstellerangaben

High power EV Charging Station The EV Charging Station has three-phase and single-phase capabilities. It delivers a maximum of 22 kW AC in three-phase or 7.3 kW in single-phase mode. WiFi Communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect App Get full control and overview of all operating parameters and session statistics at a glance. LCD Touch Screen Built-in 4.3-inch LCD Touch Screen for monitoring and control. Light Ring for fast viewing the device state Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available: 1. Manual Mode to configure output current Manual mode allows configurable output current between 6-32 A. The charging power is controlled in two ways: by using the slider on the LCD touch screen or by using its web page. It allows to manually start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiency Detects when excess power is available and uses only that power to charge the vehicle. 3. Scheduled Mode to charge the EV at certain time intervals A fully programmable scheduler allows charging at different time intervals, for example at certain times during the night when grid energy is cheaper. Integration with GX devices and VRM Control and monitor the EV Charging Station from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.

Technische Daten

Maße und Gewicht

Tiefe	148 mm
Höhe	377 mm
Breite	148 mm
Länge	307 mm
Gewicht	3 kg

Produktdetails

Serie	EV Charging Station – 22 kW
Ladespannungsbereich	170-265 V
Schutzart (IP)	IP44
Nennstrom (einstellbar)	32 A
Betriebstemperaturbereich	-25-50 °C
Kommunikation	Modbus TCP over WiFi, Bluetooth