Victron 22 kW EVC300400300

Potencia: 22 kW
Fases: 3‑fases
Disponibilidad: En stock
: Número de ofertas: 15
Pedido mínimo: 1 uds.

Descargas

PDF Ficha técnica — evc300400300 0,2 MB

Precio neto según la cantidad

desde 365,36 €

Los precios por tramos de cantidad son visibles para las empresas registradas.

Por ahora no paga nada. El coste del transporte se cotiza tras realizar el pedido y requiere su aceptación.

Descripción

Estación de carga AC Victron EVC300400300 de 22 kW, trifásica, toma, conector Tipo 2. Grado IP IP44, temperatura de funcionamiento de −25 a 50 °C, corriente nominal 32 A. Comunicación: Modbus TCP over WiFi, Bluetooth. Dimensiones 377 × 148 × 148 mm (alt. × anch. × prof.), peso 3 kg.

Información del fabricante

High power EV Charging Station The EV Charging Station has three-phase and single-phase capabilities. It delivers a maximum of 22 kW AC in three-phase or 7.3 kW in single-phase mode. WiFi Communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect App Get full control and overview of all operating parameters and session statistics at a glance. LCD Touch Screen Built-in 4.3-inch LCD Touch Screen for monitoring and control. Light Ring for fast viewing the device state Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available: 1. Manual Mode to configure output current Manual mode allows configurable output current between 6-32 A. The charging power is controlled in two ways: by using the slider on the LCD touch screen or by using its web page. It allows to manually start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiency Detects when excess power is available and uses only that power to charge the vehicle. 3. Scheduled Mode to charge the EV at certain time intervals A fully programmable scheduler allows charging at different time intervals, for example at certain times during the night when grid energy is cheaper. Integration with GX devices and VRM Control and monitor the EV Charging Station from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.

Datos técnicos

Dimensiones y peso

Profundidad	148 mm
Altura	377 mm
Anchura	148 mm
Longitud	307 mm
Peso	3 kg

Detalles del producto

Serie	EV Charging Station – 22 kW
Rango de tensión de carga	170-265 V
Grado de protección IP	IP44
Corriente nominal (configurable)	32 A
Rango de temperatura de funcionamiento	-25-50 °C
Comunicación	Modbus TCP over WiFi, Bluetooth