Victron ARG120201020R

Victron ARG120201020R

Disponibilitate
În stoc
Număr de oferte: 14
Comandă minimă
1 buc.

Preț net în funcție de cantitate

de la 54,57 €

Prețurile pe praguri de cantitate sunt vizibile pentru firmele înregistrate.

Acum nu plătiți nimic. Costul transportului îl calculăm după plasarea comenzii; acesta necesită acceptul dumneavoastră.

Descriere

Accesoriu pentru stocarea energiei Victron ARG120201020R: accesorii pentru baterii, seria Agrodiode Battery Isolators. Dimensiuni 60 × 120 × 115 mm (Î × L × A), greutate 0,8 kg.

Informații de la producător

Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. Please see our book ‘Energy Unlimited’ or ask for specialist advice when installing a diode isolator. Simply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. Alternator energize input Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run/stop switch is closed

Date tehnice

Dimensiuni și greutate

Înălțime60 mm
Adâncime115 mm
Greutate0,8 kg
Lățime120 mm

Detalii produs

SerieAgrodiode Battery Isolators
Tip accesoriuAccesorii pentru baterii

Date din fișa producătorului

Număr de baterii2