Victron BatteryProtect 12/24V-100A

Dostupnosť: Na sklade
: Počet ponúk: 12
Minimálna objednávka: 1 ks
Incoterms: CIF, EXW, FCA

Na stiahnutie

PDF Katalógový list — victron-batteryprotect-1224v-100a 1,0 MB

Cena bez DPH podľa množstva

od 41,50 €

Ceny v množstevných stupňoch sú viditeľné pre registrované firmy.

Teraz nič neplatíte. Náklady na dopravu oceníme po podaní objednávky; vyžadujú Váš súhlas.

Popis

Príslušenstvo k systému na ukladanie energie Victron BatteryProtect 12/24V-100A: príslušenstvo k batériám. Rozmery 59 × 42 × 115 mm (v × š × h), hmotnosť 0,5 kg.

Informácie od výrobcu

The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. It also provides an alternative to disable chargers without a remote on/off port to protect from over-voltage. Compared to the Smart BatteryProtect, the BatteryProtect must be programmed via the PROG pin to GND pin method. The BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current can only flow from the IN terminal to the OUT terminal.